The eBIRST switching system test tools from Pickering Interfaces allows engineers to diagnose switching systems and identify faults.
Pickering Interfaces is lowering the cost of ownership of switching systems with the introduction of its latest diagnostic eBIRST switching system test tools.
The eBIRST tools, designed specifically for Pickering Interfaces PXI, PCI or LXI (Ethernet) products, simplify switching system fault finding by quickly testing the system and identifying the faulty relays. Once identified, the tools then display a graphical representation of the switching system’s PCB assembly, highlighting the relays that need to be replaced.
The eBIRST tools achieve this task by measuring the path resistance between different pins on the switching system connector and controlling the path through the system to allow it to test any of the relays in the system. Systems that use separate input and output connections can be tested by use of two eBIRST tools in a master/slave configuration.
“In 2009 we introduced an embedded test tool, BIRST (Built-In Relay Self-Test). This tool gave our customers the ability to find defective relays in matrix products and was very well received,” states David Owen, Business Development Manager for Pickering Interfaces.
“The new eBIRST tools build on that experience by introducing external tools that can support any switching system architecture, not just matrices, with 100% relay coverage. These tools can be applied to low or medium power Pickering Interfaces switching systems using any of our primary control interfaces – PXI, PCI or LXI. For a modest investment, the tools offer our customers a quick and efficient method of identifying faults and a simple means of determining what needs to be repaired and what doesn’t. Once a user has tools covering their primary connector use, they have an investment that can save its cost many times over in reduced repair times and lower system down times. No other switching system vendor offers this level of support for its designs.”
The eBIRST tools consist of three different tools that support 200-way LFH, 78-way D and 50-way D connectors and a set of adaptors that allow connection to other connector types. A supplied application program controls the eBIRST tools via a USB2 connection that also provides the tool with power and controls the switching system using a Test Definition File to define the test sequence. The tool dimensions allow eBIRST to be used to test PXI, PCI or LXI (Ethernet) controlled switching systems.
The application program, which is free to download from the Pickering Interfaces website, is regularly updated to include support for a growing range of Pickering Interfaces switching products.